LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Seat Belt Switch >> Description

Seat Belt Switch: Description

The seat belt switch a Hall Effect-type sensor. This sensor consists of a fixed-position, Hall Effect Integrated Circuit chip and a small permanent magnet that is integral to the driver side front seat belt buckle. The seat belt switch is connected to the vehicle electrical system through a two-lead pigtail wire and connector on the driver side front seat belt buckle-half, which is connected to a wire harness connector and take out of the body wire harness on vehicles with manual seat adjusters, or to a connector and take out of the power seat wire harness on vehicles with power seat adjusters. A radio noise suppression capacitor is connected in parallel with the integrated circuit where the two pigtail wire leads connect to the integrated circuit pins.

The seat belt switch cannot be adjusted or repaired and, if faulty or damaged, the entire driver side front seat belt buckle-half must be replaced.