Installation - 2.2L Diesel
- Attach reservoir to vehicle using 2 mounting bolts. See Figure. Tighten mounting bolts to a torque of 54 N.m (40 ft. lbs.).
- Slide supply hose onto reservoir fitting. See Figure. Expand hose clamp and slide it over hose on reservoir fitting. Secure clamp once it is past bead formed into fluid reservoir fitting.
- Slide return hose onto reservoir fitting. See Figure. Expand hose clamp and slide it over hose on reservoir fitting. Secure clamp once it is past bead formed into fluid reservoir fitting.
- Install engine air cleaner. (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION)
- Install engine top appearance cover. See Figure.
- Fill fluid reservoir to proper level. (Refer to STEERING/PUMP/FLUID - STANDARD PROCEDURE - POWER STEERING FLUID LEVEL CHECKING)
- Start engine and let run for a few seconds, then turn engine off.
- Add fluid if necessary.
- Install reservoir filler cap.