LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Detent Plug

Detent Plug

DETENT PLUG

REMOVAL
1. Remove the transmission.
2. Mount the transmission on a holding fixture.





3. Use Special Tool C-3752 Slide Hammer and 8870 Adaptor to remove the detent plug (1).

INSTALLATION





1. Smooth any burrs or nicks in the detent plug bore.
2. Use a plastic mallet to drive in and fully seat the detent plug (1).
3. Remove the transmission from the holding fixture.
4. Install the transmission in the vehicle.