LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Ignition Control System) >> Knock Sensor >> Removal >> Removal - 2.4L

Removal - 2.4L

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

The knock sensor threads into the side of the cylinder block in front of the starter (Figure).

  1. Disconnect electrical connector from knock sensor.
  2. Use a crow foot socket to remove the knock sensors.