LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Ignition Control System) >> Ignition Coil >> Installation >> Installation - 3.3/3.8L

Installation - 3.3/3.8L

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install coil over studs on bracket.
  2. Install 2 nuts to the ignition coil studs. Tighten nuts and bolts.
  3. Connect the electrical connector to the ignition coil.
  4. Install the ignition cables to the ignition coil.
  5. Reposition the Power steering reservoir. Slide bracket over the mounting stud (Figure).
  6. Install 2 bolts to the Power steering reservoir to intake manifold.
  7. Tighten the lower nut to stud on ignition coil bracket.
  8. Install the throttle and speed control cables to clip.
  9. Connect the negative battery cable.