LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Ignition Control System) >> Ignition Coil >> Installation >> Installation - 2.4L

Installation - 2.4L

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install ignition coil and heat shield to valve cover and tighten bolts.
  2. Connect the electrical connector to the ignition coil.
  3. Transfer spark plug cables to new coil pack. The coil pack towers are numbered with the cylinder identification. Be sure the ignition cables are fully seated onto the towers.
  4. Connect the negative battery cable.