LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Ignition Control System) >> Camshaft Position Sensor >> Removal >> Removal - 2.4L

Removal - 2.4L

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

The camshaft position sensor is mounted to the rear of the cylinder head.

  1. Remove the negative battery cable.
  2. Disconnect electrical connectors from the camshaft position sensor (Fig 1).
    Fig 1: Identifying Egr/Cam Sensor (2.4L)
    G03586529Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove camshaft position sensor mounting screws. Remove sensor.
  4. Loosen screw attaching target magnet to rear of camshaft and remove magnet (Fig 2).
    Fig 2: Removing Target Magnet
    G03586530Courtesy of DAIMLERCHRYSLER CORP.