LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring Convertible L4-2.4L VIN X >> Repair and Diagnosis >> Body and Frame >> Locks >> Power Locks >> Power Door Lock Switch >> Service and Repair

Power Door Lock Switch: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative remote cable.
2. Remove door trim panel.
3. Disconnect switch wire connector.
4. Remove switch using a trim stick (special tool #C-4755) or equivalent.

INSTALLATION
1. Install the switch by snapping into place.
2. Connect switch wire connector.
3. Install the door trim panel.
4. Connect the battery negative remote cable.