LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Exhaust Gas RECIRCULATION System >> Exhaust Gas RECIRCULATION Valve >> Installation >> Installation - 2.7L

Installation - 2.7L

  1. Loosely install EGR valve and lower tube, use a new gasket between tube and EGR valve.
  2. Install EGR valve to rear of Cylinder head, do not tighten screws.
  3. Loosely install screws to lower EGR tube to exhaust manifold, use new gasket between tube and exhaust manifold.
  4. Install new gasket between the EGR valve and upper tube and install bolts.
  5. Tighten EGR valve to cylinder head screws to 31 N.m (275 in.lbs.) torque.
  6. Tighten the EGR tube's to EGR valve bolts to 11 N.m (95 in.lbs.) torque.
  7. Tighten EGR lower tube to exhaust manifold screws to 31 N.m (275 in.lbs.) torque.
  8. Attach electrical connector to solenoid.
  9. Install the resonator bracket.
  10. Install air inlet tube and resonator.
  11. Connect negative battery cable.