Speed Pro Steering Verification Test - Ver 1
- Connect all previously disconnected components and connectors.
- With the DRBIII®, erase DTC's.
- Cycle the ignition switch from off to on.
- With the DRBIII®, read DTC's. If any DTCs are present return to the Symptom List and perform the appropriate diagnostic procedure. If no DTCs are present, road test the vehicle for at least 15 minutes performing several steering maneuvers.
- Again with the DRBIII®, read DTC's. If any DTCs are present select the appropriate symptom from the Symptom List and perform the appropriate diagnostic procedure.
- If no DTCs are present and the customers complaint cannot be duplicated, the repair is complete.
Were there any DTCs set during the road test?
- Yes: Repair is not complete, refer to appropriate symptom.
- No: Repair is complete.