Upper Control Arm: Removal
- Remove air cleaner housing if necessary. See AIR CLEANER HOUSING . Remove the front wheel and tire assembly.
- To hold the steering knuckle from falling away from the vehicle, wire tie the steering knuckle to the shock absorber. See Fig 1 .
- Remove the upper ball joint nut from the upper control arm.
- Using Ball Joint Puller (9168), press the upper ball joint out of the steering knuckle.
- Remove the upper control arm from the body by removing the nut and bolt from inside the engine compartment. See Fig 1 .
CAUTION:
Do not subject the brake hose and any electrical cables to any tension.