LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.7L) >> Valve Springs >> Installation >> Installation - In Vehicle

Installation - In Vehicle

WARNING: This page is about a different variant/trim than selected.
  1. The valve stem seal/valve spring seat should be pushed firmly and squarely over the valve guide using the valve stem as guide. Do Not Force  seal against top of guide. When installing the valve retainer locks, compress the spring only enough  to install locks
  2. Follow the same procedure on the remaining cylinders using the firing sequence 1-2-3-4-5-6. Make sure piston is at TDC on the cylinder that the valve spring is to be removed. 
  3. Remove spark plug adapter tool and Special Tool MD 998772A.
  4. Install rocker arm(s).
  5. Install camshafts (Refer to INSTALLATION ), timing chain (Refer to INSTALLATION ), and timing chain cover (Refer to INSTALLATION ).
  6. Install cylinder head covers. (Refer to INSTALLATION ).
  7. Install upper intake manifold. (Refer to INSTALLATION ).
  8. Install air cleaner housing and inlet hose.
  9. Connect negative cable.