LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.7L) >> Oil Cooler & Lines >> Installation >> Pressure Control Valve

Pressure Control Valve

WARNING: This page is about a different variant/trim than selected.
  1. Install supply line fitting into engine block (Figure). Tighten fitting to 30 N.m (260 in. lbs.).
  2. Position control valve into fitting. Push valve into fitting until it locks in place. Ensure proper connection is made by pulling in-and-out on valve.
  3. Connect supply line to control valve. Tighten connection fitting to 30 N.m (260 in. lbs.).