LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.7L) >> Intake/Exhaust Valves & Seats >> Installation

Intake/Exhaust Valves & Seats: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Coat valve stems with clean engine oil and insert them in cylinder head.
  2. If valves or seats have been reground, check valve tip height (A) (Fig 1). If valve tip height for intake valve is greater than 47.59 mm (1.8737 in.) or 49.14 mm (1.9347 in.) for exhaust valve, grind valve tip until within specifications. Make sure measurement is taken from cylinder head surface to the top of valve stem.
  3. Install valve spring. (Refer to INSTALLATION ).
    Fig 1: Checking Valve Tip Height And Valve Spring
    G02709562Courtesy of DAIMLERCHRYSLER CORP.