Section 1 (2.7L): Camshaft(S): Inspection
WARNING: This page is about a different variant/trim than selected.
- Inspect camshaft bearing journals for damage and binding (Fig 1). If journals are binding, check the cylinder head for damage. Also check cylinder head oil holes for clogging.
- Inspect camshaft sprockets for excessive wear. Replace camshafts if necessary.
- Check the cam lobe surfaces for abnormal wear and damage. Replace camshaft if defective. Measure the actual wear (Fig 1) and replace, if out of limits-standard value is 0.0254 mm (0.001 in.); wear limit is 0.254 mm (0.010 in.).