Brake Specifications
WARNING: This page is about a different car, the 2001 Plymouth Prowler, 2000 Plymouth Prowler, 1999 Plymouth Prowler, and 1997 Plymouth Prowler. However, it is still accessible from the selected car via links, so may be relevant.
BRAKE ROTOR REFINISHING SPECIFICATIONS
| Application |
Front Rotor - In. (mm) |
Rear Rotor
- In. (mm) |
| Rotor Run Out |
.003 (.08) |
.002 (.05) |
| Rotor Thickness Variation |
.0005 (.013 ) |
.0004 (.010) |
| Minimum Rotor Thickness |
.881 (22.4) |
.736 (18.7) |
| Rotor Thickness |
.939-.949 (23.87-24.13 ) |
.793-.782 (20.13-19.87) |
| Rotor Micro Finish |
|
|
BRAKE SYSTEM COMPONENT SPECIFICATIONS
| Application |
Specification |
| System Type |
Dual/Vertically Split (Front To Rear) |
| Booster |
| Manufactuer/Type |
Bosch/Vacuum Assist |
| Mounting Studs |
M8 x 1.25 |
| Booster Size |
205 mm Tandem |
| Boost At 20" Of Manifold Vacuum |
2002N (450 lbs.) |
| Brake Pedal Ratio |
3.42:1 |
| Combination Valve |
| Material |
Aluminum |
| Function |
Proportioning & Warning Lamp Switch (Latching) |
| Front Disc Brakes |
| Caliper Type |
Single Piston/Dual Slider |
| Caliper Material |
Cast Iron |
| Brake Shoe Friction Material |
Organic Non-Asbestos |
| Friction Material Formula Identification |
BBA-2004TA |
| Caliper Piston Bore Diameter |
60 mm |
| Brake Shoe Adjustment |
Automatic |
| Caliper Piston Material |
Glass Filled Phenolic |
| Caliper Piston Dust Boot |
EPDM Rubber (Pressed In) |
| Brake Rotor Type |
Vented |
| Brake Rotor Materail |
Grey Iron Dacroment Coated |
| Brake Rotor Outside Diameter |
282 mm |
| Master Cylinder |
| Manufactuer |
Bosch |
| Type |
Tandem Compensating Port Design |
| Body Material |
Anodized Aluminun |
| Reservoir Material |
Polypropelene |
| Bore & Stroke |
25.4mm x 39.0mm (1.0" x 1.53") |
| Displacement Split Front To Rear |
65/35 |
| Master Cylinder Fluid Outlet Ports |
| Primary Thread Size |
3/8-24 UNF-2B |
| Secondary Thread Size |
7/16-24 UNS-28 |
| Outlet Fitting Type |
45° Double Wall Inverted Flare |
| Rear Disc Brakes |
| Caliper Type |
Single Piston - Dual Pin Slider |
| Caliper Material |
Cast Iron |
| Brake Shoe Friction |
Organic (Non-Asbestos) |
| Friction Material Fromula Identification |
BBA 2007 |
| Caliper Piston Bore Diameter |
54 mm |
| Brake Shoe Adjustment |
Automatic |
| Park Brake Adjustment |
Automatic |
| Caliper Piston Material |
Glass Filled Phenolic |
| Caliper Piston Dust Boot |
EPDM Rubber (Pressed In) |
| Brake Rotor Type |
Vented |
| Brake Rotor Material |
Aluminum Silica Carbide Alloy |
| Brake Rotor Outside Diameter |
330 mm |