LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1995 >> Concorde 3.5 F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.3L >> Test NS-7D >> Inspecting Idle Air Control Motor Operation

Inspecting Idle Air Control Motor Operation

NOTE: For connector terminal ID, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS - 3.3L article in ENGINE PERFORMANCE. After each repair, perform TEST VER-1  .
  1. Turn ignition off. Disconnect Powertrain Control Module (PCM) connector. PCM is located under air cleaner. Inspect all terminals. Repair as required. If PCM terminals are okay, go to next step.
  2. Using an external ohmmeter, check resistance of Violet/Black wire between IAC motor connector terminal No. 4 and PCM connector terminal No. 59. If resistance is less than 5 ohms, replace PCM. If resistance is more than 5 ohms, repair open Violet/Black wire.