LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1989 >> Conquest Standard >> Repair and Diagnosis >> Steering >> Steering Linkage >> Removal & Installation >> Tie Rod Assembly >> Inspection

Tie Rod Assembly: Inspection

Check tie rod ends for damage. Check ball studs for looseness. Measure ball stud starting torque. If ball joint starting torque exceeds specification, replace tie rod. See TIE ROD BALL STUD STARTING TORQUE table.

TIE ROD BALL STUD STARTING TORQUE

Application INCH Lbs. (N.m)
Conquest 4.0-22.0 (.45-2.5)
Raider & 4WD Ram-50 9-26 (1-3)
2WD Ram-50 4.0-13.0 (.5-1.5)