LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1986 >> Laser Base, 2.5 K, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Multi-Point >> Removal & Installation >> Automatic Idle Speed (AIS) Motor >> Removal

Automatic Idle Speed (AIS) Motor: Removal

  1. Disconnect battery ground. Disconnect 6-way throttle body connector. Remove 2 screws that mount AIS to adapter. DO NOT  remove clamp on AIS or damage will result.
  2. Remove wiring clips and remove 2 AIS wires from 6-way throttle body connector. Lift each locking tab with small screwdriver and remove each blade terminal. Lift AIS from its adapter. Remove "O" rings carefully.
scientia non olet · About LEMON Manuals