LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1982 >> Imperial >> Repair and Diagnosis >> Steering >> Steering Linkage - All Models >> Removal & Installation >> Idler Arm >> Removal

Idler Arm: Removal

  1. Raise vehicle and disconnect center link from idler arm. Remove two bolts attaching idler arm support to frame (note bolt direction).
    NOTE: If idler arm support is disconnected from frame for other work, wire support to idler arm to prevent rotation if equipped with a threaded bushing (G.M. Saginaw linkage types).
    Fig 1: Idler Arm Positioning (G.M. Models with Threaded Bushing)
    G09318862Courtesy of NOT AVAILABLE
  2. Maximum allowable lash or vertical deflection of relay rod end of idler lever is 1/8" when a 25 lb. load is applied at that point. Replace assembly if deflection is more than 1/8".