LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1966 >> Imperial Base, Not Available, Not Available Trans >> Repair and Diagnosis >> Electrical >> Starter >> Starter Controls >> Adjustment & Testing >> Solenoid Windings

Solenoid Windings

Test solenoid windings with suitable test equipment, using a 6 volt battery for power source (to prevent starter motor from energizing). Specifications should be as follows:

Solenoid Winding Specifications Direct Drive Starters

Winding Amperes
1966-68(1)
  Pull-in 20.0-22.2
  Hold-In 11.2-12.4
1969-72(2)
  Pull-In 22.4-24.0
  Hold-In 8.3-9.3
(1) At 6 volts at 70°.
(2) At 6 volts at 77°.
Solenoid Winding Specifications Gear Reduction Starters

Winding Amperes
1966-68(1)
  Pull-In 14.4-16.0
  Hold-In 11.5-12.6
1969-74(2)
  Pull-In 13.3-14.9
  Hold-In 8.0-9.0
(1) At 6 volts at 70°.
(2) At 6 volts at 77°.
Fig 1: Reduction Gear Shifter Fork Assembly
G09333280Courtesy of CHRYSLER GROUP, LLC
Fig 2: Coil Retainer Tang Height (Reduction Gear Type)
G09333281Courtesy of CHRYSLER GROUP, LLC