LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Corvette 2D Convertible >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Linkage Outer Tie Rod Replacement >> Installation Procedure

Installation Procedure

  1. GM5344328Courtesy of GENERAL MOTORS COMPANY

    Steering Linkage Outer Tie Rod (1) - Install

    2. CAUTION:

    Fastener Caution .

  2. Steering Linkage Outer Tie Rod Nut (2) - Install and tighten
    1. First Pass: 30 N.m (22 lb ft)
    2. Final Pass: 115 - 125 degrees
  3. Tighten the steering linkage inner tie rod nut (3) during the front toe adjustment procedure.
  4. Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
  5. Measure and adjust the front toe. Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
scientia non olet · About LEMON Manuals