LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Blazer RS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement (At Engine) >> Installation Procedure

Installation Procedure

  1. Ensure ALL fittings are clean and dry prior to assembly.
  2. GM4316685Courtesy of GENERAL MOTORS COMPANY

    Fuel Feed Pipe (1) - Connect - Fuel Feed Pipe Replacement (AWD) , or Fuel Feed Pipe Replacement (FWD) , or Fuel Feed Pipe Replacement (At Engine) 

  3. GM4320359Courtesy of GENERAL MOTORS COMPANY

    Fuel Feed Pipe (1) @ Fuel Pump - Connect - Metal Collar Quick Connect Fitting Service 

  4. GM4320343Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Fuel Feed Front Pipe Bracket Bolt (1) - Install and tighten 10 N.m (89 lb in)

  5. GM4320175Courtesy of GENERAL MOTORS COMPANY

    Wiring Harness Retainer (1) - Install [3x]

  6. Engine Rear Noise Shield - Install - Engine Rear Noise Shield Replacement 
  7. Inspect for leaks using the following procedure:
    1. Turn ON the ignition with the engine OFF for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition with the engine OFF.
    4. Inspect for fuel leaks.