LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Tahoe SSV >> Repair and Diagnosis >> Collision >> Body Panels >> Body Panel Replacement >> Body Panel Replacement >> Front Bumper Impact Bar Bracket Replacement >> Installation Procedure

Installation Procedure

GM5605449Courtesy of GENERAL MOTORS COMPANY
NOTE:

Prepare service part before installation.

  1. Prepare frame rail reinforcement per installation requirements.
  2. Prepare all joining surfaces for welding as necessary.
  3. Apply weld-thru coating or equivalent to all welding surfaces. Anti-Corrosion Treatment and Repair
  4. Position bumper bracket (1) to vehicle using 3-dimensional measuring equipment and clamp into place.
    GM5605448Courtesy of GENERAL MOTORS COMPANY
  5. Install MIG/MAG welds (1). [2X]
    GM5605455Courtesy of GENERAL MOTORS COMPANY
  6. Install MIG/MAG welds (1). [2X]
  7. Apply the sealers and anti-corrosion materials to the repair area as necessary. Anti-Corrosion Treatment and Repair
  8. NOTE:

    Before refinishing, refer to Anti-Corrosion Treatment and Repair

  9. Paint the repaired area. Basecoat/Clearcoat Paint Systems .
  10. Install all related panels and components.
  11. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (9C1, 5W4)Battery Negative Cable Disconnection and Connection (KL9)
  12. Enable the SIR System. SIR Disabling and Enabling .