Removal Procedure
- Front Wheelhouse Liner-Right Side - Remove - Front Wheelhouse Liner Replacement
Using a suitable tool remove the position 2 nitrogen oxides sensor (1) from the nitrogen oxides catalytic converter.
Using a suitable tool remove the position 3 nitrogen oxides sensor (1) from the nitrogen oxides catalytic converter.
Using a suitable tool remove the exhaust particulate sensor (1) from the nitrogen oxides catalytic converter.
Exhaust Pipe Clamp (1) - Loosen
Exhaust Front Pipe Nut (1) - Remove [2x]
Catalytic Converter Brace Bracket Nut (1) - Remove [2x]
- Wiring Harness Retainer (2) @Catalytic Converter Brace Bracket (3) - Remove
- Catalytic Converter Brace Bracket (3) - Remove
Exhaust Front Pipe Nut (1) - Remove [2x]
Nitrogen Oxides Catalytic Converter (1) - Remove
- Exhaust System Front Gasket (2) - Remove and DISCARD
Remove the wiring harness retainer (1) from the exhaust front bracket and position the wiring harness (2) aside.
Catalytic Converter Brace Bracket Bolt (1) - Remove [2x]
- Exhaust Front Bracket (2) - Remove
Exhaust Hanger Bracket Nut (1) - Remove
- Exhaust Front Hanger (2) @Exhaust Front Bracket (3) - Remove