Component Testing
- Ignition/Vehicle - Off
- Disconnect the electrical connector: A23C Liftgate Latch Assembly
- Test for infinite resistance between the test points: Signal terminal 2 & Ground terminal 1 - The switch is in the open position.
- If less than infinite resistance
Replace the component: A23C Liftgate Latch Assembly
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 3 Ω between the test points: Signal terminal 2 & Ground terminal 1 - The switch is in the closed position.
- If 3 Ω or greater
Replace the component: A23C Liftgate Latch Assembly
- Go to next step: If less than 3 Ω
- If 3 Ω or greater
- All OK.