LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Repair Instructions >> Catalytic Converter Replacement (L5Q) >> Installation Procedure

Installation Procedure

  1. GM4255252Courtesy of GENERAL MOTORS COMPANY

    Install the catalytic converter and gasket to the vehicle.

  2. GM4255250Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Install the lower right side stud bolt (1) to the cylinder head assembly and tighten the studs to 10 N.m (89 lb in).

  3. GM4037643Courtesy of GENERAL MOTORS COMPANY

    Install the catalytic converter nut (1) and tighten to 22 N.m (16 lb ft).

  4. GM4037641Courtesy of GENERAL MOTORS COMPANY

    Install the catalytic converter heat shield bolts and tighten to 9 N.m (80 lb in).

  5. GM4037639Courtesy of GENERAL MOTORS COMPANY

    Connect the heated oxygen sensor 1 connector.

  6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. GM4037637Courtesy of GENERAL MOTORS COMPANY

    Install the catalytic converter bracket bolts (1) and tighten to 22 N.m (16 lb ft).

  8. GM4037636Courtesy of GENERAL MOTORS COMPANY

    Install the catalytic mounting nuts and tighten to 22 N.m (16 lb ft).

  9. Install the front compartment insulator. Refer to Front Compartment Insulator Replacement .
  10. Install the exhaust muffler. Refer to Exhaust Muffler Replacement (L5Q) , or Exhaust Muffler Replacement (LV7) .
  11. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
  12. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  13. Close the hood.