Circuit/System Testing
- Ignition ON.
- Verify that DTC C0035, C0040, C0045, C0050, or C0055 is not set.
- If any listed DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle diagnose that DTC prior to this diagnostic.
- Go to next step: If none listed DTC is set
- If any listed DTC is set
- Ignition OFF, replace the K17 Electronic Brake Control Module, ignition ON.
- Verify the DTC does not set.
- If the DTC sets
Replace the module that set the DTC.
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.