LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Camaro SS, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Airbag Front End Discriminating Sensor Replacement

Airbag Front End Discriminating Sensor Replacement

WARNING: This page is about a different car, the 2018 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
GM4195476
Callout Component Name
WARNING:

Refer to SIR Warning .

WARNING:

Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:

  • The seat cushion frame
  • The seat recliner, if equipped
  • The seat adjuster
  • The seat back frame

Failure to do so may cause future personal injury.

Preliminary Procedures

  1. SIR Disabling and Enabling 
  2. Radiator Air Upper Baffle and Deflector Replacement (LGX)Radiator Air Upper Baffle and Deflector Replacement (LT1)Radiator Air Upper Baffle and Deflector Replacement (LTG)
1 Airbag Front End Discriminating Sensor Assembly [2x]
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Disconnect the electrical connector.
  2. Loosen the fastener and slide the sensor out of the keyhole slot.
NOTE:

Integral sensor assembly bolt uses Left Hand threads. Use counterclockwise rotation to loosen fastener at TORX® tip end. If accessing at pan head end of the fastener, use clockwise rotation to loosen bolt.


Tighten 
7.5 N.m (66 lb in)