Removal Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
- Block the drive wheels.
- Disable the parking brake cable adjuster. Parking Brake Cable Adjuster Disabling
- Place the ignition in the OFF position.
- Raise and support the vehicle. Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (ZL1)Lifting and Jacking the Vehicle (Convertible)
- Exhaust Muffler - Remove - Exhaust Muffler Replacement (LGX, Coupe)Exhaust Muffler Replacement (LGX, Convertible)Exhaust Muffler Replacement (LT1, LT4, Coupe)Exhaust Muffler Replacement (LT1, LT4, Convertible)Exhaust Muffler Replacement (LTG, Coupe)Exhaust Muffler Replacement (LTG, Convertible)
Remove the electronic parking brake control module bolts (1).
- Position the electronic parking brake control module to access the electrical connector.
- Disconnect the electronic parking brake control module electrical connector.
Disconnect the parking brake intermediate cable nut (1).
Remove the electronic parking brake control module bracket bolts (1).
- Separate the electronic parking brake control module from the bracket.
Maneuver and remove the electronic parking brake control module (1).