LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Volt Premier >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Repair Instructions >> Three-Way Catalytic Converter Replacement >> Removal Procedure

Removal Procedure

  1. Heated Oxygen Sensor Replacement - Sensor 1 - Remove
  2. Heated Oxygen Sensor Replacement - Sensor 2 - Remove
  3. Catalytic Converter Heat Shield Replacement  - Remove
  4. Raise and support the vehicle. Lifting and Jacking the Vehicle
  5. GM4091135Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Do not bend the exhaust flex pipe more than 10 degrees in any direction. Bending of more than 10 degrees or twisting in a range of ±0.5 degrees will damage the exhaust flex decoupler.

    Exhaust Front Pipe Nut (3) - Remove [2x]

  6. Exhaust Front Pipe (2) - Remove
  7. Remove and DISCARD the gasket. (1)
  8. GM4091332Courtesy of GENERAL MOTORS COMPANY

    Catalytic Converter Bracket Nut (2) - Remove [2x]

  9. Catalytic Converter Brace Bracket Bolt (1) - Remove
  10. GM4091351Courtesy of GENERAL MOTORS COMPANY

    Lower the vehicle.

  11. Catalytic Converter Nut (4) - Remove and DISCARD [4x]
  12. Catalytic Converter (3) & Catalytic Converter Bracket (6) - Remove
  13. Catalytic Converter Rear Heat Shield Bolt (2) - Remove [2x]
  14. Catalytic Converter Rear Heat Shield (1) - Remove
  15. Remove the catalytic converter gasket. (6)
  16. GM4091353Courtesy of GENERAL MOTORS COMPANY

    Catalytic Converter Brace Bracket Nut (3) - Remove [2x]

  17. Catalytic Converter Bracket (2)@Catalytic Converter (1) - Remove