Test 4
- Ignition/Vehicle & All vehicle systems - Off
- Disconnect the electrical connector: S79P Window Switch - Passenger
- Ignition - On / Vehicle - In Service Mode
- Verify a test lamp turns On between the test points: Ignition circuit terminal 5 & Ground
- If the test lamp does not turn On and the circuit fuse is OK
- Ignition/Vehicle - Off & Remove - Test lamp
- Test for less than 2 Ω between the test points: Ignition circuit terminal 5 & Output terminal @ F43DA Fuse
- If 2 Ω or greater - Repair the open/high resistance in the circuit.
- If less than 2 Ω - Verify the fuse is OK and there is voltage at the fuse.
- If the test lamp turns On
- Test or replace the component: S79P Window Switch - Passenger