LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Corvette Stingray, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement

Front Compartment Fuse Block Replacement

Fig 1: Front Compartment Fuse Block
GM3330995Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Replacement .
  2. Remove the right hand front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement
1 Front Compartment Fuse Block Cover
Procedure 
Carefully release the retainer tab.
2 Starter and Generator Cable Nut (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Procedure 
Reposition the starter and generator cables.
Tighten 
22 N.m (16 lb ft)
3 Forward Lamp Harness Terminal Nut (Qty: 2)
Procedure 
Reposition the forward lamp harness.
Tighten 
4.7 N.m (42 lb in)
4 Front Compartment Fuse Block Bolt (Qty: 2)
Tighten 
2.5 N.m (22 lb in)
NOTE:

Access the bolts through the wheel opening.

5 Front Compartment Fuse Block