LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Lubrication System >> Information On Overheating, Cooling System Contaminated With Engine Oil (PIP5257E)

Information On Overheating, Cooling System Contaminated With Engine Oil (PIP5257E)

Publication date: 2022-12-01
Reference number: PIP5257E
Supersedes refnos: 21-NA-108, 22-NA-240, PIP5257, PIP5257A, PIP5257B, PIP5257C, PIP5257D

INFORMATION ON OVERHEATING, COOLING SYSTEM CONTAMINATED WITH ENGINE OIL

INFORMATION ON OVERHEATING, COOLING SYSTEM CONTAMINATED WITH ENGINE OIL

TECHNICAL SERVICE BULLETIN

Reference Number(s): 22-NA-240, Date of Issue:  Dec 1, 2022
Supercedes: This bulletin replaces PIP5257E. Please discard PIP5257E.

SERVICE INFORMATION

Brand: Model: Model Year: VIN: Engine: Transmission:
from to from to
Buick Enclave 2010 2023 - - LFY, LLT -
LaCrosse 2010 2019 LF1, LFW, LFX, LGX
Cadillac ATS 2013 2019 LF4, LFX, LGX
CT4 2022 2023 LF4
CT5 2020 2023 LGY
CT6 2016 2020 LGW, LGX
CTS 2010 2019 LFW, LF3, LFX, LGX
SRX 2010 2016 LFX, LFW
XT5 2017 2023 LGX
XT6 2020 2023 LGX
Chevrolet Blazer 2019 2023 LGX
Camaro 2010 2023 LFX, LGX
Caprice 2012 2017 LFX
Captiva 2011 2018 LFX, LFW
Colorado 2015 2022 LFX, LGZ
Equinox 2010 2017 LF1, LFW, LFX
Impala 2012 2020 LFX
Traverse 2010 2023 LFY, LLT
GMC Acadia 2010 2021 LGX, LLT
Canyon 2015 2022 LFX, LGZ
Terrain 2010 2017 LF1, LFW, LFX
Involved Region or Country  North America, Brazil, Chile, Colombia, Ecuador, Paraguay, Uruguay, Venezuela, Europe, Russia, Middle East, Iraq, Japan, Cadillac Korea (South Korea), China, Taiwan, Singapore, Australia/New Zealand, Other Africa
Condition  Some customers may comment on one or more of the following conditions:
  • Overheating
  • Coolant overflowing from reservoir
  • Oil contamination in coolant
Cause  This condition may be caused by engine oil mixing into the coolant from the main oil gallery to a water jacket through block porosity or thin wall-casting or from the oil cooler into the radiator.
  • The average oil pressure is over 414 kPa (60 psi) and the coolant pressure is 110 kPa (16 psi).
Information  If you encounter a vehicle with this concern, validation on where the oil contamination is emitting from is required before replacing components:
  • If equipped, test the oil cooler system for possible leaking into the coolant through the radiator.
  • If the oil cooler tests good or the vehicle is Not  equipped with an oil cooler, then reference this bulletin and replace the engine as well as all the rubber coolant hoses.

Flush the radiator and heater core if possible or replace hoses as needed.
Also if equipped, flush the rear heater core and replace hoses as needed.

SERVICE INFORMATION

Version  1
Modified  Released December 01, 2022