LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Accessories Control Systems >> Service Side Detection System Message In DIC, DTC U0232, U0233 May Be Set (16-NA-178)

Service Side Detection System Message In DIC, DTC U0232, U0233 May Be Set (16-NA-178)

Publication date: 2016-06-02
Reference number: 16-NA-178

SERVICE SIDE DETECTION SYSTEM MESSAGE IN DIC, DTC U0232, U0233 MAY BE SET

SERVICE SIDE DETECTION SYSTEM MESSAGE IN DIC, DTC U0232, U0233 MAY BE SET

TECHNICAL SERVICE BULLETIN

Reference Number(s): 16-NA-178, Date of Issue:  Jun 2, 2016
Attention: This Bulletin also applies to Export vehicles sold in the Middle East (RPO MAM), South America (RPO CLS) and China (RPO CZ2) equipped with Side Active Safety Obstacle Detection (RPO UFT).

SERVICE INFORMATION

Brand: Model: Model Year: VIN: Engine: Transmission:
from to from to
Buick Enclave 2013 2014     All All
Chevrolet Traverse 2013 2014     All All
GMC Acadia 2013 2014     All All
Condition  Some customers may comment that a Service Side Detection System message is displayed in the Driver Information Center (DIC) or DTC U0232, U0233 may be set.
Cause  This condition may occur with water intrusion into the Side Blind Zone Module harness connector, and may cause corrosion of the terminals or water seepage into the module.

CORRECTION

If the vehicle displays the subject message or codes, the module and harness connectors should be inspected for corrosion and replaced if needed (the replacement harness will have a cover over the connector body to protect the connection), and dielectric grease applied accordingly to prevent any concerns in the future.

SERVICE PROCEDURE:

  1. Inspect the harness (1) and module (2) connectors for corrosion. If no issues are found, refer to Side Blind Spot Alert System Malfunction  in SI.
    GM4296968Courtesy of GENERAL MOTORS COMPANY
  2. If either harness or module connectors show signs of corrosion, replace the harness and both modules. Refer to Side Object Sensing Alert Module Replacement  in SI.
  3. Lubricate the harness and module connectors with dielectric lubricant to ensure corrosion-free connections.
    GM4078535Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Only GM Dielectric Lubricant must be used for this procedure. No substitutions are allowed.

PARTS INFORMATION

Side Blind Zone Harness (Traverse) 84004712
Side Blind Zone Harness (Enclave) 84004713
Side Blind Zone Harness (Acadia) 84004718
Module, Side Object Sensing Alert 22960672
Lubricant, Dielectric 12377900 (U.S.)
10953529 (Canada)

WARRANTY INFORMATION

Labor Operation Description Labor Time
6480258* Inspect and Replace Rear Sensing Harness and Modules 1.7 hrs
*This is a unique Labor Operation for Bulletin use only.
Version  1
Modified