LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Accessories Control Systems >> Invalid Product Update Message During/After Navigation Map Update Outlined In Bulletin 16-NA-328 (PIC6284A)

Invalid Product Update Message During/After Navigation Map Update Outlined In Bulletin 16-NA-328 (PIC6284A)

Publication date: 2017-06-16
Reference number: PIC6284A
Supersedes refnos: PIC6284

INVALID PRODUCT UPDATE MESSAGE DURING/AFTER NAVIGATION MAP UPDATE OUTLINED IN BULLETIN 16-NA-328

INVALID PRODUCT UPDATE MESSAGE DURING/AFTER NAVIGATION MAP UPDATE OUTLINED IN BULLETIN 16-NA-328

TECHNICAL SERVICE BULLETIN

Reference Number(s): PIC6284A, Date of Issue:  Jun 16, 2017

SERVICE INFORMATION

Brand: Model: Model Year: VIN: Engine: Transmission:
from to from to
Buick Enclave 2013-2016 All All All All
Chevrolet Captiva 2015 All All All All
Chevrolet Express 2016 All All All All
Chevrolet Traverse 2013-2016 All All All All
GMC Acadia 2013-2016 All All All All
GMC Savana 2016 All All All All
Involved Region or Country  North America
Additional RPO/s:  Navigation System (RPO UGY, UGX, UI7 or UI8)
Condition  This may be a result of the USB concern described in the Invalid Product Update Section at the bottom of bulletin 16-NA-328.
GM4817361Courtesy of GENERAL MOTORS COMPANY
Cause  This may be a result of the USB concern described in the Invalid Product Update Section at the bottom of bulletin 16-NA-328.
This may be a normal result of already having the latest map update installed as mentioned above step 1 and 7 of bulletin 16-NA-328.

CORRECTION

If this concern is encountered follow the Invalid Product Update Section at the bottom of bulletin 16-NA-328, which explains how to insert the USB into a computer, eject it at least five times and re-evaluate for the concern. Also ensure that this is not a result of the normal concern outlined above step 1 and 7 of bulletin 16-NA-328 that occurs if the latest map update is already installed.

If this does not alleviate the concern, please answer the following questions and contact GM Technical Assistance to document this and review next steps:

  1. Have you referenced and followed Bulletin 16-NA-328? How many times was the USB safely ejected after following the Invalid Product Update Section at the bottom of bulletin 16-NA-328?
    NOTE:

    All requested information below can be found using Bulletin 16-NA-328.

  2. What is the vehicle 17digit VIN?
  3. Does the vehicle VIN match the VIN listed on USB Packing slip?
    NOTE:

    USB is VIN encrypted and will ONLY work in the VIN it is made for. Note If error message is "Invalid VIN", the VIN on the USB does not match the vehicle VIN. The technician may contact the GM NavDisc Center to reorder the USB with the correct VIN.

  4. What is the Radio End Model Part Number as read with GDS2 (Module Diagnostics>>Radio>>Identification Information>>End Model Part Number)?
  5. What is the Calibration Part Number 1 listed for the radio Operating System Part Number as read with GDS2 (Module Diagnostics>>Radio>>Identification Information>>Calibration Part Number 1)?
  6. What is the part number on the USB?
  7. What was the original 8 digit map part number in the radio before attempting the map update (as checked before Step 1 of bulletin 16-NA-328)?
  8. What was the original 6 digit map revision in the radio before attempting the map update (as checked before Step 1 of bulletin 16-NA-328)?
  9. What is the current 8 digit map part number in the radio after attempting the map update (Select Settings>>Navigation Settings>> Scroll down to "Database Information" or "Data Software)?
    NOTE:

    If part number is 23506029, map has been updated in the vehicle and it is normal for the "invalid product" message to appear if the update is already installed

  10. What is the current 6 digit map revision in the radio after attempting the map update (Select Settings>>Navigation Settings>> Scroll down to "Database Information" or "Data Software)?
    NOTE:

    If revision is 2015Q1, the map has been updated in the vehicle and it is normal for the "invalid product" message to appear if the update is already installed

  11. Was the vehicle hooked up to a battery tender/charger during installation (Bulletin Step 1)?
    NOTE:

    Voltage drop may stop update from completing.

  12. Was the vehicle ignition left in the On position during the installation (Bulletin Step 2)?
    NOTE:

    Update will not complete if vehicle is not in the On position

  13. How long was the update allowed to run (Bulletin Steps 4-6)?
    NOTE:

    There are some error messages that will show during the update. Do not interrupt or remove the USB during the update. Let it run.

  14. Was the error encountered while updating but the update continued (Bulletin Steps 4-6)?
    NOTE:

    There are some error messages that will show during the update. Do not interrupt or remove the USB during the update. Let it run.

  15. Which port was the USB plugged into?
  16. Was the vehicle moved/driven during the installation (Bulletin Steps 4-6)?
  17. Has a second installation been attempted?
  18. What is the exact sequence of events when the error message was encountered and exactly what does the error message say?

SERVICE INFORMATION

Version  2
Modified  6/17/2017 Updated to add direction of cycling USB in computer