Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the appropriate X80 Accessory Power Receptacle or E32 Cigarette Lighter Receptacle.
- Test for less than 5 Ω between the ground circuit terminal C and ground.
- If greater than the specified range, test the ground circuit for an open/high resistance.
- Verify that a test lamp illuminates between the voltage circuit terminal A and ground.
- If the test lamp does not illuminate, test the voltage circuit for a short to ground or an open/high resistance.
- Replace the appropriate X80 Accessory Power Receptacle or E32 Cigarette Lighter Receptacle.