Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the appropriate power outlet receptacle.
- Test for less than 5 Ω between the ground circuit terminals listed below and ground.
- Accessory Power Outlet Terminal B
- Cigar Lighter Terminal C
- If greater than the specified range, test the ground circuit for an open/high resistance.
- Ignition ON, test for B+ between the B+ circuit terminals listed below and ground.
- Accessory Power Outlet Terminal A
- Cigar Lighter Terminal B
- If less than the specified range, test the B+ circuit for a short to ground or an open/high resistance.
- Replace the appropriate power outlet receptacle.