Installation Procedure
- Install the window run channel and window sealing strip (1) together to the door.
- Install the window run channel to door upper retaining screws (1).
Tighten
Tighten the screws to 3 N.m (27 lb in).
- Install the window run channel to door retaining screws (2).
Tighten
Tighten the screws to 3 N.m (27 lb in).
- Install the window run channel inside trim panel (1) to the door (2).
- Install the window inner weatherstrip. Refer to Rear Side Door Window Inner Weatherstrip Replacement .
- Install the window inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
- Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
IMPORTANT:
Fit the window sealing strip (1) to the run channel together before fitting to the door.
CAUTION:
Refer to Fastener Caution .