Headlamp Replacement (OUTLOOK)
WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Acadia) or Front Bumper Fascia Replacement (Enclave) or Front Bumper Fascia Replacement (OUTLOOK) or Front Bumper Fascia Replacement (Traverse) . |
|
| 1 | Headlamp Assembly Bolt (Qty: 3)
CAUTION:
Refer to Fastener Caution
. Tip: Tighten the fasteners in sequence as shown. Tighten: 6 N.m (53 lb in) |
| 2 | Headlamp Assembly Nut Tighten: 6 N.m (53 lb in) |
| 3 | Headlamp Assembly Procedure: Pull outward on the housing in order to disconnect the electrical connection at the lower rear edge of the lamp. |
| 4 | Electrical Harness Connector Procedure: Disconnect the electrical connector from the headlamp assembly. |