LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala SS >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement (LS4)

Power Steering Pump Replacement (LS4)

Fig 1: Exploded View Of Power Steering Pump
GM1571707Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Place a drain pan under the vehicle.
  2. Remove the drive belt. Refer to Drive Belt Replacement - Accessory .
  3. Remove the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement (LS4)  or Power Steering Pump Pulley Replacement (LZ4/LZE/LZ9) .
  4. Fill and bleed the power steering system after the repair has been completed. Refer to Power Steering System Bleeding .
1 Power Steering Pump Hose Clamp
Tip:  Use an appropriate tool to remove the power steering fluid from the reservoir before relocating the clamp. Also plug the end of the hose between the reservoir and the power steering pump to limit the leakage of the steering fluid.
2 Power Steering High Pressure Hose Fitting
CAUTION: Refer to Fastener Caution .

Tighten:  27 N.m (20 lb ft)

3 Power Steering Pump Bolt (Qty: 3)

Tighten:  25 N.m (18 lb ft)

4 Power Steering Pump