LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR LS, Automatic >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Mirror System >> Repair Instructions >> Outside Rearview Mirror Motor Replacement

Outside Rearview Mirror Motor Replacement

Fig 1: Identifying Outside Power Rearview Mirror Motor
GM1608747Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement .
1 Outside Rearview Mirror Glass
Tip: 
  1. Apply masking tape to the top of the outside of the mirror housing to prevent damage.
  2. Push the mirror face inward at the bottom until full travel is reached.
  3. Insert a J 38778  Door Trim Pad Clip Remover or equivalent behind the glass and the first rib support and pry outward until the mirror face is released.
  4. When installing the mirror glass align the mirror face to the backing plate and apply pressure, using a rubber sanding block or equivalent, until an audible click is heard.
2 Front Door Mirror Motor Screw (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten:  3 N.m (25 lb in)

3 Front Door Outside Rearview Mirror Motor
Tip:  Disconnect the electrical connector.