LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Monte Carlo SS >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Return Hose Replacement (LS4)

Power Steering Return Hose Replacement (LS4)

Fig 1: Identifying Power Steering Return Hose
GM1603408Courtesy of GENERAL MOTORS CORP.
Power Steering Return Hose Replacement (LS4)

Callout Component Name
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  2. Place a drain pan under the vehicle.
  3. Raise and lower the vehicle as necessary to access the power steering return hose clamp at the cooler pipe/hose. Refer to Lifting and Jacking the Vehicle .
  4. Fill and bleed the power steering system after the repair has been completed. Refer to Power Steering System Bleeding .
1 Bolt, Power Steering Return Hose/Pipe

Tighten:  55 N.m (41 lb ft)


Tip:  Remove the power steering return hose clamp (at cooler pipe).
2 Pipe/Hose, Power Steering Return
Tip:  Remove the power steering return pipe/hose clamp (at reservoir).