LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Equinox LT, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.4L - Introduction (2 Of 2) >> Repair Instructions >> Camshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Lubricate the CMP sensor O-rings with clean engine oil.
  2. Fig 1: View Of CMP Sensor
    GM1087797Courtesy of GENERAL MOTORS CORP.
  3. Install the CMP sensor.
  4. NOTE: Refer to Fastener Notice .
  5. Install the CMP sensor bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  6. Connect the CMP sensor electrical connector.