LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Wheel Alignment System) >> Repair Instructions >> Rear Camber Adjustment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle and provide suitable support. Refer to Lifting and Jacking the Vehicle .
    Fig 1: Identifying Rear Camber Adjustment
    GM156938Courtesy of GENERAL MOTORS CORP.
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  3. Remove the strut from the vehicle. Refer to Strut Assembly Replacement .
  4. Place the strut in a vise and file the upper strut-to-knuckle hole lateral - oblong. Compare the appearance of the holes before filing (2) with after filing (3).