Conditions for Running the DTC
- DTC P0101, P0102, P0103, P0107, P0108, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128, P0315, P0335, P0336, P0340, P0341, P0502, or P0503 is not set.
- The engine speed is between 475-5,850 RPM.
- The ignition voltage is between 9-18 volts.
- The engine coolant temperature (ECT) is between -7 and +124°C (+19 and +255°F).
- The fuel level is more than 10 percent.
- The antilock brake system and the traction control system (TCS) are not active.
- The transmission is not changing gears.
- The A/C clutch is not changing states.
- The PCM is not in fuel shut-off or decel fuel cut-off mode.
- The PCM is not receiving a rough road signal.
- The exhaust gas recirculation (EGR) intrusive test is not active.
- The diagnostic runs continuously when the above conditions are met.