Removal Procedure
- If equipped with a power sliding door, disable the PSD system by removing the PSD 15A fuse from the instrument panel (I/P) fuse block.
- Remove either the right or left rear tail lamp. Refer to Tail Lamp Assembly and/or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement in Lighting Systems.
- Remove the sliding door center track cover rear screw.
- Open the sliding door.
- Remove the front center track screw.
- Carefully remove the center sliding track cover from the center track rail.
IMPORTANT:
By removing the power sliding door (PSD) 15A fuse, the low current logic power for both the LH and RH power sliding door modules (PSDM) will be interrupted and both PSDs will be inoperative.