LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander LS >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Diagnostic Information and Procedures >> DTC B3250 >> Circuit Description

Circuit Description

The power sliding door control module (PSDM) uses an optical sensor to monitor the power sliding door (PSD) position at all times. The optical sensor requires a 5-volt reference circuit and a reference return circuit from the PSDM. There are also 2 signal circuits from the PSDM to the optical sensor. The optical sensor sends pulses through both signal circuits to the PSDM whenever the PSD is in motion. The optical sensor pulses allow the PSDM to calculate the position of the PSD at all times. The optical sensor signal circuits switch from 0.01-4.5 volts as the PSD is moving.