LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the battery negative cable.
  2. Fig 1: Expanded View Of Stop Lamp Switch & Brake Pedal
    GM161625Courtesy of GENERAL MOTORS CORP.
  3. Remove the retainer (3) from the brake pedal pin.
  4. Unsnap the switch (2) and pushrod (4) from the brake pedal (1) pin.
  5. Fig 2: Locating Brake Switch Electrical Connector
    GM161582Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector.