LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating License Lamp Retaining Screws
    GM296133Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb.
  2. Install the license lamp.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the license lamp screws.

    Tighten:  Tighten the license lamp screws to 2 N.m (18 lb in).